Installation and Warranty

Installation Information

Your new KG Clutch Factory clutch components should be installed by a qualified motorcycle service technician. For best results use recommended KG Clutch Factory springs. In order to avoid damage to your new KG Clutch Factory disks, they should be immersed in the clutch oil recommended by the manufacturer of your motorcycle for approximately two hours before they are installed.

The same installation procedures should be followed for the KG Clutch Factory components as shown in the service manual for your motorcycle. The clutch may slip initially due to excess oil in the clutch pack. Before riding, disengage the clutch with the engine running to free the clutch of excess oil.

Limited Warranty

There are many types of friction disk material. Many bikes are equipped with cork or a paper material from the factory. These materials have advantages and disadvantages There are various materials that are used to make up friction material. A common name that is used is Kevlar, but Kevlar is only one element out of many making up the friction material used for a disk. Not all Kevlar disk are the same, just because a pack of clutches is marked Kevlar does not meant that it is the right clutch disk for your application. KG Clutch Factory has many different formulas of Kevlar disks depending on the motorcycle, model and the application. We have learned from hours and hours of testing what is needed for each application. We have also found where, within a clutch pack, it is appropriate to use Kevlar. Kevlar disks should not be used when they will come in contact with an aluminum center or outer. When Kevlar is used, while in contact with aluminum centers and outers, the material can cause premature wear of the aluminum in even the mildest street riding. When appropriate KG Clutch Factory disk sets are packaged with a material appropriate to be used with aluminum on the top and the bottom. If the directions tell you to throw away any parts besides the ones you are replacing you have bought a poorly designed kit. Many companies will instruct you to throw away a spring the fits inside the inner most disk, on some models. KG Clutch Factory disks are designed to use that spring to maintain the operation that the factory designed.

This product is warranted only to the original purchaser (such warranty is not transferable) against defects in materials or workmanship for a period of twelve (12) months from the date of purchase. In the event that this product is found, in the sole discretion of the manufacturer, to be defective, the manufacturer’s obligation is limited to, at its sole and absolute option, whether replacing the defective component with the same model, or refunding the purchase price of the defective component. KG Clutch Factory components believed to be defective should be returned with proof of purchase to your distributor or:

KG Power Sports (A.K.A. KG Clutch Factory)
543 West Algonquin Road
Arlington Heights, Illinois, U.S.A. 60005

Replacement or refund, as provided under this warranty, is exclusive remedy of the customer. The manufacturer shall not be liable for any direct or indirect incidental or consequential damages for breach of warranty on any product whether in contract or in tort, express or implied, in law or in fact. There are no warranties which extend beyond those expressly stated herein; all implied warranty of merchantability or fitness for a particular purpose, on this product are excluded. The manufacturer shall not be liable for any expense or injury arising directly or indirectly from use of this product, defective or otherwise.